Product Details:
|
Product Name: | Hydraulic Grapple | Model: | PC270 PC290 PC300 PC350 PC360 |
---|---|---|---|
Material: | Q-345B | Rotating Oil Flow: | 30-40L/min |
Service: | OEM & Customized | Quality Control: | ISO & 100% Inspection Before Shipment |
AppliCATEEion: | Construction Machinery | Max. Opening Width: | 2250mm |
Packing: | Wooden Pallet | Suitable Excavator: | 25-36 Tons Excavator |
High Light: | PC290 Excavator Attachment,PC350 Excavator Attachment,Excavator Hydraulic Rotary Steel Grapple |
What's the Hydraulic Grapple?
Hydraulic grapple is widely used for handling, loading and unloading materials, sugarcane, wood, stone, steel slag, grabbing ,garbage, scrap metal and other special operations. As one of the leading Excavator attachment manufacturers in China, Huilian has a full range of grapples suitable for all kinds of brands excavators.
Rotator Grapple Features
1. Raw material: Q355Mn steel
2. Claw with strengthen structure
3. Double cylinders built in
4. Wide jaw opening large capacity
5. Specially for pulpwood handling
6. Easy operation
PC270 PC290 PC300 PC350 PC360 Hydraulic Rock Excavator Attachment Hydraulic Rotary Steel Grapple
Product name | Hydraulic Rotary Steel Grapple |
Model | HL300MGY |
AppliCATEEEEion model | PC270 PC290 PC300 PC350 PC360 |
Max. opening width | 2300 mm |
Rotating oil flow | 30-40L/min |
Rotating pressure | 100-130Kg/cm2 |
Operating聽oil flow | 100-150 L/min |
Operating pressure | 180-220Kg/cm2 |
Suitable excavator | 25-36 tons |
AppliCATEEEEion | Handling and unloading of wood, stone and steel; laying of medium pipes for urban sewage; modeling operation of river and sea dam,etc. |
Our Hydraulic Rotary Steel Grapple Product SpecifiCATEEEEion
Model | Unit | HL60MGY | HL150MGY-3 | HL200MGY-3 | HL300MGY |
External dimension |
mm | 1415*630 | 1740*750 | 2440*1255 | 2480*1260 |
Max. opening width |
mm | 1500 | 1710 | 2250 | 2300 |
Grasp weight |
kg | 1300 | 1400 | 2000 | 2500 |
Rotating oil flow |
L/min | 25-35 | 30-40 | 30-40 | 30-40 |
Rotating pressure |
Kg/cm2 | 80-120 | 90-120 | 100-130 | 100-130 |
Operating oil flow |
L/min | 30-50 | 80-140 | 100-150 | 100-150 |
operating pressure |
Kg/cm2 | 160-220 | 180-220 | 180-220 | 180-220 |
Weight | kg | 360 | 850 | 1600 | 1800 |
Suitable excavator |
ton | 5-8 | 12-18 | 18-24 | 25-36 |
Product Maintenance
1.Daily checkpoint: Whether there is any damage or deformation of the body, hose interface leakage, damage to the pin and bushing and its replacement
cycle,check the oil level of the gear, check the bolt and nut, the gear
tightening loose state.
2.Conventional checkpoint: The seals and rotating parts of the hydraulic
cylinder will wear out, and should be replaced in time after reaching the
service life. Replacement parts should be matched with the original factory. Check the rotating shaft in 360 degrees,whether easy to work from any
Angle, check that there is enough lubricant on the rotating shaft and bolts
are tight enough.
3. Check the tightening state of bolts, install new bolts, check 8 hours after
use, and ensure that the tightened bolts are not loose. Damaged bolts
should be replaced in time. Bolts should be replaced after approximately
1500 hours or 12 months of use after installation.
4. It is recommended to check whether there is oil leakage regularly to
ensure that there is no fault and the product can run smoothly. Every 4 hours: fill lubriCATEEEEing oil, lubriCATEEEEe shaft pin and rotating gear once;
Every half year or 1000 hours (whichever comes first) : Replace the hydraulic
cylinder oil seal and motor oil seal once.
Product Features
We Can Supply Following Excavator Model Attachments
CATEEEE200 | CATEEEE240 | CATEEEE305 | CATEEEE307 | CATEEEE315 | CATEEEE320A | CATEEEE320B |
CATEEEE325B | CATEEEE325C | CATEEEE325D | CATEEEE330B | CATEEEE330C | CATEEEE345C | CATEEEE345D |
CATEEEE325A | CATEEEE312C | CATEEEE312A | CATEEEE312B | CATEEEE330A | CATEEEE320C | CATEEEE320D |
CATEEEE330C | CATEEEE330D | CATEEEE345B | PC30 | PC40 | PC55 | PC60 |
PC100 | PC120 | PC180 | PC200 | PC210 | PC220 | PC240 |
PC260 | PC300 | PC400 | PC360 | PC450 | EX60 | EX100 |
EX400 | EX450 | ZX50 | ZX70 | ZX120 | ZX350 | ZX360 |
ZX400 | ZX450 | ZX230 | ZX240 | ZX270 | ZX330 | ZX870 |
ZX470 | EX30 | EX40 | SK350 | SK330 | SK55 | SK200 |
SK210 | SK230 | SK250 | SK320 | SK100 | SK450 | DH35 |
DH55 | DH60 | DX60 | DH70 | DX225 | DX300 | DH80 |
DH215 | DH150 | DH210 | DH150 | DH220 | DH280 | DH300 |
DH370 | R55 | R120 | R130 | R140 | R160 | R180 |
R200 | R210 | R250 | R290 | R300 | R360 | R450 |
R320 | SH60 | SH75 | SH100 | SH120 | SH135 | SH150 |
SH160 | SH200 | SH210 | SH220 | SH300 | SH135 | SH150 |
SH160 | SH330 | SH450 | EC55 | EC210 | EC240 | EC290 |
EC360 | EC330 | JCB 3cx | JCB 4cx | PC650 | PC1250 |
Contact Person: Ms. KOKO XIAO
Tel: +8613924109994
Fax: 86-20-82193863